Support
ADSL Support
Tenda Router Setup
How to set up the Tenda Router for Broadband ADSL with SAOL.com
- Open Internet Explorer and type in the address bar 192.168.1.1 and press enter.
- Enter the Username and Password in the login box.
- Username : admin
- Password : admin
- This will bring you to the setup page, click on Wizard on the left which will take you through the wizard setup.
- Enter settings as displayed below.
- Country : Default
- Area : 8/35
- VPI : 8
- VCI : 35
- Enable Quality of Service must not be ticked
- Click next to go to step 2 of the wizard setup
- Connection Type : PPP over Ethernet ( PPPoE)
- Encapsulation Mode : LLC/SNAP-BRIDGING
- Click next to go to step 3 of the wizard setup
- PPP Username : Enter your username that was supplied by SAOL.Com
- PPP Password : Enter your password that was supplied by SAOL.Com.
- PPPoE Service Name : Blank
- Authentication Method : Auto
- MTU : 1492
- Dial on Demand : no tick in box
- PPP IP Extension : no tick in box
- Use Static IP Address : no tick in box
- Retry PPP password on authentication error : no tick in box
- Bridge PPPoE Frames Between WAN and Local Ports ( Default Enabled ) : box must be ticked
- Click next to go to step 4 of the wizard setup
- Enable IGMP Multicast : no tick in box
- Enable WAN Service : box must have a tick
- Service Name : pppoe_8_35_1
- Click next to go to step 5 of the wizard setup
- This will show the WAN Setup – Summary
- Click Save/Reboot
- This will save the settings and reboot the router
- If you have an All-in-1 account, your login is "Your Username@allin1.saol.com
- If you have a bundle account (R138 special), your login is "Your Username@ipc.saol.com
- If you have a Turbo account, your login is "Your Username@turbo.saol.com"
.jpg)




