Support

ADSL Support

 

Duxbury Wireless Router Setup

 

How to set up the Duxbury Wireless Router for Broadband ADSL with SAOL.com

 

  • Open Internet Explorer and type in the address bar 192.168.1.1 and press enter.

Duxbury Wireless-Set1.bmp

  • Enter the Username and Password in the login box.
  • Username : admin
  • Password : system
  • This will bring you to the Router Status Page as displayed below :

Duxbury Wireless-Step2.JPG

  • Click WAN
  • Click Channel Config
  • This will take you to the next step as displayed below :

Duxbury Wireless-Wan config step3.bmp

  • Click on Select on the Current ATM Table
  • VPI : 8
  • VCI : 35
  • Encapsulation : LLC
  • Channel Mode : PPPoE
  • Username : Enter the username that was supplied by SAOL.Com
  • Password : Enter the password that was supplied by SAOL.Com
  • Type : Continuous
  • Click Modify
  • This will take you to the next step as displayed below :

Duxbury Wireless-Wan config step3.bmp

  • Click Select on the Current ATM Table
  • Click on the Pencil under Actions
  • This will take you to the next step as displayed below :

 

Duxbury Wireless-wan config step4.bmp

  • Login name : Username supplied by SAOL.Com
  • Password : Password supplied by SAOL.Com
  • Authentication Method : Auto
  • Connection Type : Continuous
  • Default Route : Enable
  • Bridge : Disable Bridge
  • Click Apply Changes
  • This will bring you to the next step as displayed below :

 

Duxbury Wireless-Wan config step3.bmp

  • Click on Wireless
  • Click on Security
  • This will bring you to the Wireless Security setup as displayed below :

Duxbury Wireless-security step8 preshared key.bmp

  • Encryption : Click on drop down arrow and select option : WPA(TKIP)
  • Pre-Shared Key Format : Passphrase
  • Pre-Shared Key : Enter the pre-shared key given by SAOL.Com
  • Click Apply Changes
  • This should bring you to the screen below :

Duxbury Wireless-security step8.bmp

  • Click OK
  • This will bring you back to the basic setup page.

Duxbury-Admin Reboot.bmp

  • Click on Admin
  • Below Admin, click on Commit and Reboot
  • This will bring up the Commit/Reboot Screen
  • Click on Commit and Reboot
  • This will save the settings and reboot the router

 

 

  • If you have an All-in-1 account, your login is "Your Username@allin1.saol.com
  • If you have a bundle account (R138 special), your login is "Your Username@ipc.saol.com
  • If you have a Turbo account, your login is "Your Username@turbo.saol.com"